Skip to content Skip to navigation menu

52292509 CONDITION MONITORING UNIT

42-48V, 50/60 Hz, not parameterized, display not included
Availability
In Stock

Recommended item

69760518 CONDITION MONITORING UNIT

Only available if the original ControlPro has POW Motor torque calculation measurement. Can be checked from ControlPro parameter: 4-7-1 is Motor. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 48V

60493999 UPGRADE KIT

Master Pro retrofit kit to replace ControlPro. Designed for single hoists, no POW measurement, no modem. Supports all control voltages, comes with instructions.

69760522 CONDITION MONITORING UNIT

Only available if 4 or 5 ControlPro’s are connected to same CAN bus. Can be checked from ControlPro parameter: 4-11-1 Hoist cnt. Work number and position code (HOIST A/B/C/D1/D2) needed for order text line. Control Voltage: 48V

66334589 UPGRADE KIT

Master Pro retrofit kit to replace ControlPro. Designed for multi-hoisting, no POW measurement, no modem. NOTE: When one ControlPro in a multi-hoisting system is replaced by a Master Pro, ALL ControlPro must be replaced!

69811842 UPGRADE KIT

Master Pro retrofit kit to replace ControlPro. Designed for multi-hoisting, no POW measurement, no modem, no parameters. NOTE: When one ControlPro in a multi-hoisting system is replaced by a Master Pro, ALL ControlPro must be replaced!

69754566 UPGRADE KIT

Master Pro retrofit kit to replace ControlPro. Designed for single hoists, no POW measurement, no modem, no parameters. Supports all control voltages, comes with instructions.

69760520 CONDITION MONITORING UNIT

Only available if the original ControlPro uses RS232 serial link, e.g., for PC software (optional) or PLC system. Needs to be checked from electrical diagram. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 48V

Product availability is limited

The product availability for the current offering of condition monitoring units (CID) is limited. There are options to replace the current products with the CID – ECU upgrade kits.

Please replace with the CID - ECU upgrade kit:

  • 69754566 UPGRADE KIT ECU-UPGR-STD-0-0-0-K (NOT Parameterized)

If there are 2-3 condition monitoring units (CID) in the same bus, you need to also order 1 piece or 2 pieces from the following:

  • 69811842 UPGRADE KIT 2-3 ECU-STD-0-0-0-K (NOT Parameterized)

Please note, the CID - ECU upgrade kit is not suitable for the following applications because ECU doesn’t support:

  • POW measurement
  • Serial communication (RS232)
  • Communication between CID and ECU

You can order the following products for these:

  • 69760518 CID048_POW_PARAMETRIZED

Can be checked from CID parameter: 4-7-1 is Motor

  • 69760520 CID048_PLC_ PARAMETRIZED (CPI and CXT smart)

Needs to be checked from electrical diagram

  • 69760522 CID048_MULTI_ PARAMETRIZED, (if the crane has 4 to 5 CID’s)

Can be checked from CID parameter: 4-11-1 Hoist cnt

Weight 0.55 kg
Customs code: 9030840000