52292510 KUNNONVALVONTAYKSIKKÖ
Hinta ja saatavuus
Kirjaudu sisään tai rekisteröidy nähdäksesi yksityiskohtaiset saatavuudet ja hinnat.
Kirjaudu sisään / RekisteröidySuositeltu Tuote
69760519 KUNNONVALVONTAYKSIKKÖ
Only available if the original ControlPro has POW Motor torque calculation measurement. Can be checked from ControlPro parameter: 4-7-1 is Motor. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 115-230V
Master Pro retrofit kit to replace ControlPro. Designed for multi-hoisting, no POW measurement, no modem, no parameters. NOTE: When one ControlPro in a multi-hoisting system is replaced by a Master Pro, ALL ControlPro must be replaced!
69760523 KUNNONVALVONTAYKSIKKÖ
Only available if 4 or 5 ControlPro’s are connected to same CAN bus. Can be checked from ControlPro parameter: 4-11-1 Hoist cnt. Work number and position code (HOIST A/B/C/D1/D2) needed for order text line. Control Voltage: 115-230V
69760521 KUNNONVALVONTAYKSIKKÖ
Only available if the original ControlPro uses RS232 serial link, e.g., for PC software (optional) or PLC system. Needs to be checked from electrical diagram. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 115-230V
Master Pro retrofit kit to replace ControlPro. Designed for single hoists, no POW measurement, no modem, no parameters. Supports all control voltages, comes with instructions.
The product availability for the current offering of condition monitoring units (CID) is limited. There are options to replace the current products with the CID – ECU upgrade kits.
Please replace with the CID - ECU upgrade kit:
- 69754566 UPGRADE KIT ECU-UPGR-STD-0-0-0-K (NOT Parameterized)
If there are 2-3 condition monitoring units (CID) in the same bus, you need to also order 1 piece or 2 pieces from the following:
- 69811842 UPGRADE KIT 2-3 ECU-STD-0-0-0-K (NOT Parameterized)
Please note, the CID - ECU upgrade kit is not suitable for the following applications because ECU doesn’t support:
- POW measurement
- Serial communication (RS232)
- Communication between CID and ECU
You can order the following products for these:
- 69760519 CID115_POW_ PARAMETRIZED
Can be checked from CID parameter: 4-7-1 is Motor
- 69760521 CID115_PLC_ PARAMETRIZED, (CPI and CXT smart)
Needs to be checked from electrical diagram
- 69760523 CID115_MULTI_ PARAMETRIZED, (if crane has 4 to 5 CID’s)
Can be checked from CID parameter: 4-11-1 Hoist cnt
| Paino | 0,55 kg |
| Tullikoodi: | 9030840000 |