Siirry sisältöön Siirry navigointivalikkoon
Konecranes Finland Store - Suomi
Nykyinen kauppa
Konecranes Finland Store
Vaihda kauppa
  1. Etusivu
  2. CID-42/48V PARAM. VALVONTAYKSIKKÖ

CID-42/48V PARAM. VALVONTAYKSIKKÖ

42-48V, 50/60 Hz, parameterized with factory settings, display not included
CID-42/48V PARAM. VALVONTAYKSIKKÖ

Suositeltu Tuote

60493999 KORVAUSSARJA

60493999 KORVAUSSARJA

Master Pro retrofit kit to replace ControlPro. For cranes with ONE hoist (includes 1 Master Pro device) with parameters. No POW measurement. Supports all control voltages, comes with instructions.

69760518 KUNNONVALVONTAYKSIKKÖ

69760518 KUNNONVALVONTAYKSIKKÖ

Only available if original ControlPro has POW Motor torque calculation measurements. Check from ControlPro Parameter. 4-7-1 is Motor. Work number and position code (HOIST A/B) needed for order text. Control Voltage: 48 V

69760520 KUNNONVALVONTAYKSIKKÖ

69760520 KUNNONVALVONTAYKSIKKÖ

Only available if the original ControlPro uses RS232 serial link, e.g., for PC software (optional) or PLC system. Needs to be checked from electrical diagram. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 48V

69760522 KUNNONVALVONTAYKSIKKÖ

69760522 KUNNONVALVONTAYKSIKKÖ

Only available if 4 or 5 ControlPro’s are connected to same CAN bus. Can be checked from ControlPro parameter: 4-11-1 Hoist cnt. Work number and position code (HOIST A/B/C/D1/D2) needed for order text line. Control Voltage: 48V

Tuotekuvaus
Product availability is limited

The product availability for the current offering of condition monitoring units (CID) is limited. There are options to replace the current products with the CID – ECU upgrade kits.

Please replace with the CID - ECU upgrade kit:

  • 60493999 UPGRADE KIT ECU-UPGR-STD-P-0-0-K (Parameterized)

If there are 2-3 condition monitoring units (CID) in the same bus, you need to also order 1 piece or 2 pieces from the following:

  • 66334589 UPGRADE KIT 2-3 ECU-STD-P-0-0-K (Parameterized)

Please note, the CID - ECU upgrade kit is not suitable for the following applications because ECU doesn’t support:

  • POW measurement
  • Serial communication (RS232)
  • Communication between CID and ECU

You can order the following products for these:

  • 69760518 CID048_POW_PARAMETRIZED

Can be checked from CID parameter: 4-7-1 is Motor

  • 69760520 CID048_PLC_ PARAMETRIZED (CPI and CXT smart)

Needs to be checked from electrical diagram

  • 69760522 CID048_MULTI_ PARAMETRIZED, (if the crane has 4 to 5 CID’s)

Can be checked from CID parameter: 4-11-1 Hoist cnt

Tekniset tiedot
Paino 0,56 kg
Tullikoodi: 90308400