Hoppa till innehåll Gå till navigationsmenyn
Konecranes Finland Store - Svenska
Nuvarande butik
Konecranes Finland Store
Änrda Butik
  1. Hem
  2. Reservdelar
  3. Vanliga krankomponenter och delar
  4. Gemensamma elektriska delar
  5. Gemensamma elkomponenter
  6. 52421194 ÖVERVAKNINGSENHET

52421194 ÖVERVAKNINGSENHET

42-48V, 50/60 Hz, parameterized with factory settings, display not included
52421194 ÖVERVAKNINGSENHET
52421194 ÖVERVAKNINGSENHET
52421194 ÖVERVAKNINGSENHET

Besondere Empfehlung

66334589 RESERVDELSSATS

66334589 RESERVDELSSATS

Master Pro retrofit kit to replace ControlPro. Parameterized. Designed for multi-hoisting, no POW measurement, no modem. NOTE: When one ControlPro in a multi-hoisting system is replaced by a Master Pro, ALL ControlPro must be replaced!

60493999 RESERVDELSSATS

60493999 RESERVDELSSATS

Master Pro retrofit kit to replace ControlPro. Parameterized. Designed for single hoists, no POW measurement, no modem. Supports all control voltages, comes with instructions.

69760518 ÖVERVAKNINGSENHET

69760518 ÖVERVAKNINGSENHET

Only available if the original ControlPro has POW Motor torque calculation measurement. Can be checked from ControlPro parameter: 4-7-1 is Motor. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 48V

69760520 ZUSTANDSÜBERWACHUNGSEINHEIT

69760520 ZUSTANDSÜBERWACHUNGSEINHEIT

Only available if the original ControlPro uses RS232 serial link, e.g., for PC software (optional) or PLC system. Needs to be checked from electrical diagram. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 48V

66334591 ERSATZ-KIT

66334591 ERSATZ-KIT

Nachrüstsatz Master Pro als Ersatz für ControlPro. Parametrisiert. Ausgelegt auf Einzelhubwerke, keine POW-Messung, kein Display, kein Modem. Unterstützt alle Steuerspannungen, mit Anleitung geliefert. (60493999).

60494002 ERSATZ-KIT

60494002 ERSATZ-KIT

Nachrüstsatz Master Pro als Ersatz für ControlPro. Parametrisiert. Ausgelegt auf Einzelhubwerke, keine POW-Messung, kein Display, kein Modem. Unterstützt alle Steuerspannungen, mit Anleitung geliefert. (60493999).

69760522 ZUSTANDSÜBERWACHUNGSEINHEIT

69760522 ZUSTANDSÜBERWACHUNGSEINHEIT

Only available if 4 or 5 ControlPro’s are connected to same CAN bus. Can be checked from ControlPro parameter: 4-11-1 Hoist cnt. Work number and position code (HOIST A/B/C/D1/D2) needed for order text line. Control Voltage: 48V

Product availability is limited

The product availability for the current offering of condition monitoring units (CID) is limited. There are options to replace the current products with the CID – ECU upgrade kits.

Please replace with the CID - ECU upgrade kit:

  • 60493999 UPGRADE KIT ECU-UPGR-STD-P-0-0-K (Parameterized)

If there are 2-3 condition monitoring units (CID) in the same bus, you need to also order 1 piece or 2 pieces from the following:

  • 66334589 UPGRADE KIT 2-3 ECU-STD-P-0-0-K (Parameterized)

Please note, the CID - ECU upgrade kit is not suitable for the following applications because ECU doesn’t support:

  • POW measurement
  • Serial communication (RS232)
  • Communication between CID and ECU

You can order the following products for these:

  • 69760518 CID048_POW_PARAMETRIZED

Can be checked from CID parameter: 4-7-1 is Motor

  • 69760520 CID048_PLC_ PARAMETRIZED (CPI and CXT smart)

Needs to be checked from electrical diagram

  • 69760522 CID048_MULTI_ PARAMETRIZED, (if the crane has 4 to 5 CID’s)

Can be checked from CID parameter: 4-11-1 Hoist cnt

Nuvarande butik
Konecranes Finland Store
Änrda Butik