52421194 监控单元
Recommended item
Master Pro retrofit kit to replace ControlPro. Parameterized. Designed for multi-hoisting, no POW measurement, no modem. NOTE: When one ControlPro in a multi-hoisting system is replaced by a Master Pro, ALL ControlPro must be replaced!
Master Pro retrofit kit to replace ControlPro. For cranes with ONE hoist (includes 1 Master Pro device) with parameters. No POW measurement. Supports all control voltages, comes with instructions.
69760518 CONDITION MONITORING UNIT
Only available if original ControlPro has POW Motor torque calculation measurements. Check from ControlPro Parameter. 4-7-1 is Motor. Work number and position code (HOIST A/B) needed for order text. Control Voltage: 48 V
The product availability for the current offering of condition monitoring units (CID) is limited. There are options to replace the current products with the CID – ECU upgrade kits.
Please replace with the CID - ECU upgrade kit:
- 60493999 UPGRADE KIT ECU-UPGR-STD-P-0-0-K (Parameterized)
If there are 2-3 condition monitoring units (CID) in the same bus, you need to also order 1 piece or 2 pieces from the following:
- 66334589 UPGRADE KIT 2-3 ECU-STD-P-0-0-K (Parameterized)
Please note, the CID - ECU upgrade kit is not suitable for the following applications because ECU doesn’t support:
- POW measurement
- Serial communication (RS232)
- Communication between CID and ECU
You can order the following products for these:
- 69760518 CID048_POW_PARAMETRIZED
Can be checked from CID parameter: 4-7-1 is Motor
- 69760520 CID048_PLC_ PARAMETRIZED (CPI and CXT smart)
Needs to be checked from electrical diagram
- 69760522 CID048_MULTI_ PARAMETRIZED, (if the crane has 4 to 5 CID’s)
Can be checked from CID parameter: 4-11-1 Hoist cnt
| 重量 | 0.56 kg |