Original service provider for both Konecranes and Demag equipment
52292509 UNITÉ DE CONTRÔLE DE L'ÉTAT
42-48V, 50/60 Hz, not parameterized, display not included
Add to cart to request a quote without signing in
Prix:
Please login / register to see price
Ajouté à votre panier
Articles recommandés
69760522 UNITÉ DE CONTRÔLE DE L'ÉTAT
Only available if 4 or 5 ControlPro’s are connected to same CAN bus. Can be checked from ControlPro parameter: 4-11-1 Hoist cnt. Work number and position code (HOIST A/B/C/D1/D2) needed for order text line. Control Voltage: 48V
69760520 UNITÉ DE CONTRÔLE DE L'ÉTAT
Only available if the original ControlPro uses RS232 serial link, e.g., for PC software (optional) or PLC system. Needs to be checked from electrical diagram. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 48V
69760518 UNITÉ DE CONTRÔLE DE L'ÉTAT
Only available if the original ControlPro has POW Motor torque calculation measurement. Can be checked from ControlPro parameter: 4-7-1 is Motor. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 48V
Master Pro retrofit kit to replace ControlPro. Designed for single hoists, no POW measurement, no modem, no parameters. Supports all control voltages, comes with instructions.
Master Pro retrofit kit to replace ControlPro. Designed for single hoists, no POW measurement, no modem, no parameters. Supports all control voltages, comes with instructions.
Master Pro retrofit kit to replace ControlPro. Designed for multi-hoisting, no POW measurement, no modem. NOTE: When one ControlPro in a multi-hoisting system is replaced by a Master Pro, ALL ControlPro must be replaced!
Master Pro retrofit kit to replace ControlPro. Designed for multi-hoisting, no POW measurement, no modem, no parameters. NOTE: When one ControlPro in a multi-hoisting system is replaced by a Master Pro, ALL ControlPro must be replaced!
Master Pro retrofit kit to replace ControlPro. Designed for multi-hoisting, no POW measurement, no modem, no parameters. NOTE: When one ControlPro in a multi-hoisting system is replaced by a Master Pro, ALL ControlPro must be replaced!
Master Pro retrofit kit to replace ControlPro. Designed for single hoists, no POW measurement, no modem. Supports all control voltages, comes with instructions.
Product availability is limited
The product availability for the current offering of condition monitoring units (CID) is limited. There are options to replace the current products with the CID – ECU upgrade kits.
Please replace with the CID - ECU upgrade kit:
- 69754566 UPGRADE KIT ECU-UPGR-STD-0-0-0-K (NOT Parameterized)
If there are 2-3 condition monitoring units (CID) in the same bus, you need to also order 1 piece or 2 pieces from the following:
- 69811842 UPGRADE KIT 2-3 ECU-STD-0-0-0-K (NOT Parameterized)
Please note, the CID - ECU upgrade kit is not suitable for the following applications because ECU doesn’t support:
- POW measurement
- Serial communication (RS232)
- Communication between CID and ECU
You can order the following products for these:
- 69760518 CID048_POW_PARAMETRIZED
Can be checked from CID parameter: 4-7-1 is Motor
- 69760520 CID048_PLC_ PARAMETRIZED (CPI and CXT smart)
Needs to be checked from electrical diagram
- 69760522 CID048_MULTI_ PARAMETRIZED, (if the crane has 4 to 5 CID’s)
Can be checked from CID parameter: 4-11-1 Hoist cnt
| Poids | 0,55 kg |
| Code douanier: | 90308400 |