Original service provider for both Konecranes and Demag equipment.
52421195 MONITORING UNIT
115-230 V, 50/60 Hz, parameterized with factory settings, display not included
Price and availability
Please log in or register to see detailed availability and prices.
Log in / RegisterRecommended item
Master Pro retrofit kit to replace ControlPro. Designed for multi-hoisting, no POW measurement, no modem. NOTE: When one ControlPro in a multi-hoisting system is replaced by a Master Pro, ALL ControlPro must be replaced!
OMNI CONTROL retrofit kit to replace NOVA MASTER. Designed for single hoists, no POW measurement, no modem. Supports all control voltages, comes with instructions. Equivalent to item 60493999.
69760521 CONDITION MONITORING UNIT
Only available if the original ControlPro uses RS232 serial link, e.g., for PC software (optional) or PLC system. Needs to be checked from electrical diagram. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 115-230V
Master Pro retrofit kit to replace ControlPro. Designed for single hoists, no POW measurement, no modem. Supports all control voltages, comes with instructions.
OMNI CONTROL retrofit kit to replace NOVA MASTER. Designed for single hoists, no POW measurement, no modem. Supports all control voltages, comes with instructions. Equivalent to item 60493999.
69760519 CONDITION MONITORING UNIT
Only available if the original ControlPro has POW Motor torque calculation measurement. Can be checked from ControlPro parameter: 4-7-1 is Motor. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 115-230V
69760523 CONDITION MONITORING UNIT
Only available if 4 or 5 ControlPro’s are connected to same CAN bus. Can be checked from ControlPro parameter: 4-11-1 Hoist cnt. Work number and position code (HOIST A/B/C/D1/D2) needed for order text line. Control Voltage: 115-230V
Product availability is limited
The product availability for the current offering of condition monitoring units (CID) is limited. There are options to replace the current products with the CID – ECU upgrade kits.
Please replace with the CID - ECU upgrade kit:
- 60493999 UPGRADE KIT ECU-UPGR-STD-P-0-0-K (Parameterized)
If there are 2-3 condition monitoring units (CID) in the same bus, you need to also order 1 piece or 2 pieces from the following:
- 66334589 UPGRADE KIT 2-3 ECU-STD-P-0-0-K (Parameterized)
Please note, the CID - ECU upgrade kit is not suitable for the following applications because ECU doesn’t support:
- POW measurement
- Serial communication (RS232)
- Communication between CID and ECU
You can order the following products for these:
- 69760519 CID115_POW_ PARAMETRIZED
Can be checked from CID parameter: 4-7-1 is Motor
- 69760521 CID115_PLC_ PARAMETRIZED, (CPI and CXT smart)
Needs to be checked from electrical diagram
- 69760523 CID115_MULTI_ PARAMETRIZED, (if crane has 4 to 5 CID’s)
Can be checked from CID parameter: 4-11-1 Hoist cnt
| Weight | 0.56 kg |
| Customs code: | 84314980 |